Combiner 200 DUAL BATTERY CHARGING SYSTEM

Description

Battery Combiner for alternators up to 200 amps.

Connects 2 or more batteries in parallel when either is receiving a charge. Separates them when charging ceases.

(For Alternators up to 200-Amps)

• Suitable for alternators up to 200-Amps with 175-Amp continuous rating, 400-Amp closing current, and charging levels up to 18-Volts

• Combiner 200 switches to charge mode when the Lead-Acid battery being charged reaches 13.3-Volts

• Supplied 6-Gauge crimp terminals and 5/16-18 studs and hex nuts for connecting customer supplied 6-AWG cable leads to battery positive (+) posts.

• Connect customer supplied ground cable to 4-40 threaded post labeled NEGATIVE (-) on the Combiner 200

NOTE: Delivery on this product may take 7 to 10 days from time of payment. Shipping will be direct from the manufacturer in the US.

For alternators greater than 200 amps use the Combiner 600.

FULL DETAILS HERE – Click to download and view the owner’s instruction manual .

Features & Specifications

• Protects alternator against overload from low battery levels

• Waterproof and Ignition rated for explosive atmosphere

• Electronic thermal monitoring with shutdown & restart

• Can be used on alternators with internal regulators

• Green LED Indicates when combined for charging, and red LED Indicates Overload or Low Voltage Detected Condition

• Draws no current when batteries are not being charged and less than 150-Milliamps when charging is in progress, so no heat sinking or cooling required

• No diodes to burn out if accidentally shorted

• Withstands ambient temperature to over 175°F (80°C for exposed or engine compartment installations

• No special wiring for alternators with external sense

• Optional external remote for Off/Automatic/On. Remote “ON” can be used for assisted engine starting

• One (1) year factory-direct limited warranty